There are a lot of things that people overlook when it comes to things like fiber optic tools. The biggest thing is that they do not investigate the correct cleaners that need to be used for them. So, here are the six things that you need to know about fiber optic tools and their cleaners that go along with them.
1. Cleaning:
The first thing to know is how important it is to make sure that they are being cleaned. Fiber optic cables are known for being able to transmit vast amounts of data over extremely long distances, however, if those cables are damaged or contaminated in any way it can reduce the performance and lower the life expectancy of those very cables to such a large degree that they would need to be replaced far too quickly.
2. Size of Contaminants:
Things like oil and dust particles that are so small that you cannot see them with the naked eye are big enough to cause a blockage in the entire core of one mode fiber. Even though it is on such a small scale, it can cause permanent damage which neither you nor the customer would want at all.
3. Impact:
So, some of the effects that the contaminants can have on a fibre optic line include things like the fact that they have found up to 16% of connectors were contaminated enough that it was the sole cause for performance problems in the home network. There is also the fact that when they did research, they have found that 85% of fibre link failures were caused solely by contaminations getting into the fibre optic lines.
4. Problems that Arise:
The biggest issue with this is the fact that the contaminations are 100% impossible for people to see with the naked eye. Dust from mating and de-matting a bundle of the wires causes a lot of the contamination issues. Then you have the problems of people mating a dirty plug with another clean socket, which contaminates them both.
5. Cleaners to not Use:
Isopropyl alcohol and excessive solvents are things that you should watch out for as they can cause contaminants in the form of gels and oils to be left behind as they are too tough to remove with just these types of cleaners. The other thing that you should not use are things like dry rags; they can leave behind contaminants and even will not remove much of anything, to begin with. To know more about such cleaners one can visit places like Mektronics.
6. Cleaners to Use:
There are different types of cleaners that you can use to help clean tools. It is all a matter of searching for them. There are websites out there that you can find cleaners that work the best with fiber optic tools. Some cleaners to investigate mainly would be ones like electro wash MX cleaner degreaser, the FOCCUS compact cleaning kit, and more. There are so many out there that you can choose from.
In conclusion, do not just forgo cleaning them because you are unsure of what it is that you can and cannot use. There are a lot many resources out there to help people find the exact products that they need. Some are more expensive than others because they all do different things when it comes to the cleaning abilities that they have and do not have.
